Description
Innovative 5ml 6ml Preheat Live Rosin Vape Disposable with Screen for HHC CBD THC oils
User instruction;
*PRESS 5 times to turn ON/OFF, RGB light flash for 3 times quickly, the screen displays current voltage, puffs and battery power for 2 seconds.
*PRESS twice for preheat at 1.8V, the LED light becomesmulti-colors and the screen displays countdown from 10 seconds to 0.
*PRESS 3 times to adjust voltages 2.4V/2.8V/3.2V
Specification:
Size: 83.5*45.1*15.1mm (L*W*H)
Weight: 44g
Battery capacity: 320mAh
Tank optiopns: 5ml 6ml
Feeding oil holes: 4*Φ2.0mm
(The oil holes can be customized according to HHC oil concentration)
Resistance value: 1.2 Ω
Oil filling instructions
1. Insert the needle into the space between the air channel and the outer wall of the oil tank. When the atomizer is vertically oriented,
Fill the oil tank with oil through the needle. Do not fill the oil tank more than 95% of its capacity. The temperature when filling should not exceed 125 degrees Fahrenheit (about 50 degrees Celsius).
And pay attention to the oil injection speed not being too fast. Refer to the oil injection speed (14mm/S). This will allow the air in the oil tank to escape and prevent the generation of bubbles.
2. Install the silicone and mouthpiece within 90 seconds after filling the oil. (Failure to install the silicone and mouthpiece within 90 seconds after filling the oil may cause oil leakage or blockage).
3. After installing the mouthpiece, please leave the product for 1-2 hours and wait for the oil temperature to drop to room temperature (otherwise it will cause risks such as oil leakage)
4. After the oil temperature drops to room temperature, the next step of packaging can be carried out.
5. Please strictly follow the above operations. If you need to store the product after completion, please store the product upside down until ready for retail.
6. The atomizer should be left standing upright for at least 30 minutes before use. Let the e-liquid slowly soak into the atomizer core until the atomizer core is saturated to avoid dry burning.
(Note: The rate at which the atomizer core saturates depends on the viscosity of the liquid. Thicker fluids may require more time)
7. Please try to use products without oil injection within half a year to avoid uncontrollable factors.